At Urban Engineering Limited, sustainability is not a box to tick — it is an engineering discipline embedded at every stage of how we design and build. Bangladesh is among the countries most vulnerable to climate change; its construction industry has a profound responsibility to build more efficiently, more responsibly, and with a longer view of environmental impact.
We offer end-to-end green construction and engineering services — from early-stage sustainable design strategy and green building certification targeting through passive design, renewable energy integration, and sustainable materials specification, to landscaping, urban greening, and operational environmental management. Your sustainability goals are our primary objective from day one.
A complete green building service — from sustainable design strategy and certification targeting through construction, landscaping, and operational environmental management.
Integrated sustainable architectural and engineering design — optimising building orientation, massing, envelope performance, glazing ratios, natural ventilation pathways, and daylighting to minimise energy demand from the outset rather than retrofitting green features onto a conventional design.
Strategic guidance and documentation support for LEED, EDGE, and BGBC (Bangladesh Green Building Council) certification — credit gap analysis, energy and water modelling, materials sourcing documentation, and submission management to achieve target rating levels.
Construction delivery that implements the sustainable design — minimising construction waste, controlling dust and runoff, using environmentally certified materials, managing embodied carbon, and maintaining a construction environmental management plan (CEMP) throughout the build.
Design and integration of rooftop and building-integrated photovoltaic (BIPV) solar systems, solar water heating, and where applicable small-scale wind energy — with system sizing, yield modelling, grid-tie design, and net metering documentation for Bangladesh Energy Regulatory Commission (BERC) compliance.
Design and implementation of landscaped open spaces, bioswale drainage gardens, green roofs, vertical green walls, tree planting programmes, and urban heat island mitigation measures — improving outdoor thermal comfort and biodiversity while managing stormwater sustainably.
Preparation of Environmental Impact Assessments (EIA), Environmental Management Plans (EMP), Construction Environmental Management Plans (CEMP), and environmental monitoring programmes — for DoE submission and development partner environmental review compliance in Bangladesh.
Bangladesh has a hot-humid tropical climate with distinct wet and dry seasons. Designing sustainably here means working with the climate intelligently — maximising natural ventilation to reduce cooling loads, managing solar gain without blocking daylight, and handling the intense monsoon rainfall through on-site stormwater systems rather than overloading drainage networks.
Building orientation aligned with prevailing south-west monsoon breezes; cross-ventilation through strategic window and opening placement; stack-effect ventilation for taller buildings — reducing mechanical cooling energy by up to 40% in suitable climates.
External shading devices (louvres, brise-soleil, overhangs) sized precisely for Dhaka's solar angles; high-performance glazing specification; reflective roof coatings to reduce solar heat gain through the building envelope.
Collection, storage, filtration, and reuse of monsoon rainwater for toilet flushing, irrigation, and cooling tower makeup — dramatically reducing potable water consumption in a country that receives 2,000–3,000mm of rainfall annually.
Optimised window-to-wall ratios, light shelves, and clerestory glazing to maximise interior daylighting; combined with LED luminaires, daylight sensors, and occupancy controls to minimise artificial lighting energy consumption.
We guide clients through leading international and local green building certification programmes — from initial credit strategy to final submission and award.
LEED is the world's most widely recognised green building certification, administered by the US Green Building Council. We provide LEED credit strategy, energy modelling (ASHRAE 90.1 baseline), water efficiency analysis, materials and resources documentation, and submission support for Certified, Silver, Gold, and Platinum ratings.
EDGE, supported by the International Finance Corporation (IFC/World Bank Group), is a streamlined green building standard well-suited to emerging markets including Bangladesh. EDGE certification requires demonstrating minimum 20% reductions in energy use, water use, and embodied energy of materials. We provide EDGE modelling and certification support for residential, commercial, and industrial buildings.
The Bangladesh Green Building Council rating system is specifically calibrated to Bangladesh's climate, regulatory environment, and construction industry context. We work with the BGBC framework for projects targeting local certification, helping clients navigate the national rating criteria and demonstrate compliance through appropriate documentation and modelling.
What a building is made of matters as much as how it performs in operation. We specify materials that minimise environmental harm without compromising structural integrity or cost.
Blended cement mixes incorporating fly ash or ground granulated blast-furnace slag (GGBS) to reduce Portland cement content and embodied CO₂ — with no compromise to structural performance.
Specification of recycled steel, reclaimed aggregates, and recycled content finishing materials — reducing virgin resource extraction and supporting Bangladesh's growing circular construction economy.
Prioritising locally manufactured and regionally sourced materials to reduce transport-related carbon emissions and support the Bangladesh construction supply chain — assessed within a 800km regional sourcing radius.
Specification of paints, adhesives, sealants, and flooring with low volatile organic compound (VOC) content — protecting indoor air quality and occupant health from day of occupation.
Genuine sustainability commitment, technical depth, and the ability to deliver on green ambitions — not just advise on them.
Urban Engineering believes healthy buildings and a healthy planet are not in conflict with cost-effective construction. Our integrated team delivers green outcomes that reduce your energy bills, improve occupant wellbeing, and future-proof your assets against tightening environmental regulations.
Certified specialists in LEED and EDGE rating systems — guiding projects to certification from credit gap analysis through final submission.
Whole-building energy simulation using EnergyPlus and eQUEST — quantifying design improvements before construction, not after.
Full rooftop and BIPV solar system design, yield modelling, and BERC net metering compliance documentation within our green building service.
Rainwater harvesting, greywater recycling, and water-efficient fixture selection — targeting 30-50% reductions in building water consumption.
Native planting, bioswales, green roofs, and urban heat island mitigation — integrated landscape design that improves ecology and stormwater management.
Environmental Impact Assessments and Environmental Management Plans prepared to DoE and development partner standards for all project categories requiring clearance.
Common questions about green construction, sustainable design, and building certification in Bangladesh.
The cost premium for a certified green building in Bangladesh depends heavily on the rating level targeted and how early sustainability objectives are integrated into the design process. When green principles are embedded from the project's inception — optimising orientation, passive design, and building form — the incremental cost is minimal. Studies in comparable emerging markets suggest EDGE certification adds 1–3% to construction cost, while LEED Silver to Gold typically adds 3–7%. Critically, these upfront costs are recovered through operational savings: energy bill reductions of 20–35%, water bill reductions of 25–50%, and improved occupant productivity. For commercial buildings, green certification also increasingly commands rental and asset value premiums. Urban Engineering helps clients evaluate the full lifecycle economics — not just the upfront cost.
EDGE (Excellence in Design for Greater Efficiencies) is a green building certification system developed by the IFC (International Finance Corporation, a World Bank Group member) specifically designed for emerging market economies — making it an excellent fit for Bangladesh. Unlike LEED, which was developed for the North American context, EDGE is calibrated against local climate data, local energy grids, and local construction practices. The core requirement is demonstrating at least 20% improvement in energy use, water use, and embodied energy of materials compared to a baseline building. The EDGE App makes preliminary modelling accessible early in the design process. Urban Engineering recommends EDGE as the most practical entry point for green certification for residential apartment buildings, garment factories, and commercial office buildings in Bangladesh.
Bangladesh has a net metering policy administered through the Bangladesh Energy Regulatory Commission (BERC) and distributed through the national distribution companies (DESCOs, DPDC, REB). Under net metering, solar power generated but not consumed on-site is exported to the grid, and the building's electricity meter credits the owner for that export. During periods when the building consumes more than the solar panels generate, power is drawn normally from the grid. The net difference is billed or credited monthly. Urban Engineering designs rooftop solar systems sized to the building's daytime load profile — maximising self-consumption and minimising export for grid-connected buildings, or designing battery-backed systems where power reliability is critical. We handle all BERC application and technical documentation for net metering connection approval.
Yes — and Bangladesh's garment industry has become a global leader in green factory certification, with the country hosting more LEED-certified garment factories than any other nation. LEED for Industrial and Warehouse (under LEED v4 BD+C) and EDGE Industrial are both applicable frameworks. Key credit categories for garment factories include: energy-efficient air handling and lighting, optimised natural ventilation and daylighting, water-efficient sanitation and rainwater reuse, low-emission interior finishes, and sustainable site management. Green certification has become a commercial requirement for many international fashion brands sourcing from Bangladesh, making it a business imperative — not just an environmental choice. Urban Engineering has the experience to guide garment factory and industrial clients through LEED and EDGE certification in the Bangladesh context.